Katech 2016+ Gen 6 Camaro/CTS-V3 Dual Fuel Pump Module Kit with Harness and Controller.

Introducing the KAT-A7838 Katech Lowside Fueling Solution for Gen 6 Camaro and CTS V3 platform:

Engineered to cater to the needs of Gen 6 Camaro and CTS V3 enthusiasts. This fuel pump module was meticulously designed to accommodate twin OEM grade high-output fuel pumps. This sealed drop-in fuel pump module retains ALL FACTORY FUNCTIONALITY, including low-level fueling performance which no other solution on the market has. You can operate this fuel system on the road course with factory low-level fuel performance unlike the aux pump and unsealed module solutions currently on the market.

Low Level Fuel Performance:
KAT-A7838 guarantees uncompromised performance under all conditions. By retaining the factory low-level fueling prowess and incorporating a venturi system, the fuel module ensures a continuous flow of fuel at all fuel levels, outpacing even the most demanding scenarios. Conquer lateral G-forces and unleash your vehicle's true potential with the assurance of consistent, full-throttle fueling. Note that this venturi system matches the performance of the OEM system, it is always suggested to keep your fuel level above E when possible in high performance driving scenarios.

Seamless Integration:
No drilling or bonding in fittings required. Experience a hassle-free installation and a seamless transition to enhanced fueling capabilities. The Katech Lowside Fueling Solution is engineered to be a true drop-in solution, retaining factory connections for a plug-and-play experience. The primary OEM grade high-output fuel pump is controlled by the factory FPCM.

Power Potential:
KAT-A7838 kit doubles your fuel capacity. With this configuration, our fuel module is poised to support 1000rwhp on E85 in a factory returnless setup.

Additional Notes:
Leak-Free Design: Our solution guarantees a leak-free experience without any drilling or bonded fittings, preserving the integrity of your vehicle's fueling system.
Flexible Control: Exercise total control over the secondary pump using the control solution of your choice, or seamlessly integrate with our Katech twin pump PWM controller.
Factory Compatibility: Retain the essence of your factory setup with our solution, preserving the returnless fuel system, fuel level sender, EVAP functionality, and tank connections.
Future Expansion: Anticipate the forthcoming launch our post-pump filtration kit.

Requirements to Run this module:
To use the Katech Lowside Fueling Solution, a post-pump fuel filter (5-10µm, stainless or micro fiberglass, E85 rated) is required.

The KAT-A7815 Plug & Play Controller/Harness allows for a seamless integration with no cutting or drilling required.

Kit includes:
KAT-A7763 - 2016+ Gen 6 Camaro/CTS-V3 Dual Fuel Pump Module
KAT-A7815 - PNP Harness/Controller